What are embedded passives and actives?
- Posted by doEEEt Media Group
- On September 30, 2020
- 0
Differences between SMT Passive, SMT Active, Embedded Passive and Embedded Active
Custom Inductors vs. Ready-Made Options
- Posted by Tomáš Zedníček
- On September 29, 2020
- 0
Engineers are under time and budget pressures to complete their tasks efficiently. Designing a power supply can be a daunting task, especially for those without much experience. One of the most critical components will be magnetic. For a basic non-isolated buck, boost, or SEPIC converters, the power storage inductor must be determined.
Radiation Sensitive Technologies and EEE Parts
- Posted by Juanjo Medina
- On September 28, 2020
- 0
For a better understanding, the information is split into 3 points that represent the different radiation mechanisms which affect an electronic component, giving a brief introduction of each as well as presenting a summary table of technologies and effects.
New Planar X Series of RF Filters
- Posted by doEEEt Media Group
- On September 28, 2020
- 0
Smiths Interconnect has introduced its new Planar X Series of RF filter solutions with bandpass, bandstop, lowpass and highpass configurations up to 18 GHz (Ku Band).
DCL/BOM Manager Manual
- Posted by doEEEt Media Group
- On September 28, 2020
- 0
The Declared Component List – DCL is functionality that aims to improve the management process by providing a standardized way of exchanging the list of components (now called DCL´s/BOM´s, where BOM is the meaning of Bill of Materials).
Access to this functionality is only enabled for registered users and enables the list to be created, imported, shared or exported.
What is a Parts Procurement Control Parts (PPCP)?
- Posted by Manuel Sánchez Ruiz
- On September 28, 2020
- 0
PPCP defines the technical provisions and all the associated procedures for EEE parts, including all the engineering and quality assurance aspects. This allows to establish an homogeneity regarding parts quality and dependability during all project procurement phase.
PRODUCT ASSURANCE (PA) Support: What is and why it is important
- Posted by Manuel Sánchez Ruiz
- On September 28, 2020
- 0
Product Assurance (PA) stands as a fundamental pillar. Product Assurance can be defined as the set of requirements that materials, processes and parts must comply to assure proper performance of the equipment during the mission lifetime. These rules are gathered in a PA Plan.
Introduction to Parts Selection for Space Applications
- Posted by Manuel Sánchez Ruiz
- On September 28, 2020
- 0
Introduction to the five main criteria to be followed when selecting parts for a Space Project: Performance, Availability, Quality Level/Reliability, Lead Time...
Insertion-loss measurements of ferrite absorber sheets
- Posted by doEEEt Media Group
- On September 27, 2020
- 0
The development of stealth aircraft brought about the use of ferrite absorber sheets, which have proven useful for damping cavity resonances at microwave frequencies. Since then, ferrite absorber sheets have become useful at mitigating EMI
Flux developed new products under ESA GSTP contract
- Posted by doEEEt Media Group
- On September 25, 2020
- 0
After Final Review by ESA, the new designs entered an ESCC Qualification Campaign, which is now successfully concluded and reported to ESA.