ALTER Laboratory Services, INSPECTION, ELECTRICAL & VERIFICATION, TESTING

Vibration Services & Acreditations

Posted by María Teresa Rodríguez
On February 8, 2021
0

Vibration Testing is a very specialized field where Alter Technology is a highly qualified laboratory performing numerous tests in EEE Parts. To do all this kind our services that our expert brings to you, we have extended and qualified accreditations that bring to your needs a secure and safe work.

ALTER Laboratory Services, INSPECTION, ELECTRICAL & VERIFICATION, TESTING

Vibration Laboratory Equipment

Posted by María Teresa Rodríguez
On February 8, 2021
0

At Alter Technology we offer a full Laboratory Equipment for any needs in differents type and shapes of the Hi-Rel Components with an expert group that will support you in all the process.

EEE Components, PASSIVES

Flat Aluminum Electrolytic Capacitors withstand 150 °C and 80g Vibration

Posted by doEEEt Media Group
On December 28, 2020
0

NHR capacitors are constructed with rectangular stainless-steel cases and laser-welded covers that prevent dry-out. These capacitors have a 3,000-hour life at full-rated conditions and withstand up to 80g vibration to meet the most demanding military, aerospace, industrial, and down-hole applications.

ACTIVES, COTS, New Space, LEO Constellations, EEE Components

Q-TECH: RAD TOLERANT for LEO applications

Posted by Manuel Padial Pérez
On December 25, 2020
0

Produced and tested on the same line as Q-tech most stringent space qualified oscillators, the parts proposed for LEO applications, QT780 SERIES, QT723 SERIES, QT735 SERIES are made with the same Q-Tech quality and reliability

EEE Components, PASSIVES

High Vibration Acceleration-Resistant Coil

Posted by doEEEt Media Group
On November 18, 2020
0

Choke coils with high resistance to vibration and heat as well as support for large current are essential for removing noise and smoothing the power supply of power circuits

PHYSICAL, MECHANICAL & ASSEMBLY, TESTING

Mechanical Shock Test for Electronic devices

Posted by María Teresa Rodríguez
On October 8, 2020
0

The purpose of mechanical shock testing is to evaluate the reliability of devices subjected to severe shocks which might result from suddenly applied forces or abrupt changes in motion produced by rough handling, transportation, or field operation.

ACTIVES, COTS, New Space, LEO Constellations, EEE Components

RAKON: High Reliability Radiation Tolerant COTS

Posted by Manuel Padial Pérez
On August 15, 2020
0

XOs RK105 and VCXOs RK205 products specifically designed for New Space applications, have the following characteristics

Microsectioning - Short Technical Notes, PHYSICAL, MECHANICAL & ASSEMBLY, TESTING

Evaluation of Electronic Assemblies

Posted by Mari Carmen López
On July 18, 2020
0

Assembly process of THT or SMT onto PCBs for spacecraft applications follow well-established design requirements based on specifications prepared by ECSS (ECSS-Q-ST-70-08C & ECSS-Q-ST-70-38C), NASA and IPC (IPC-6012).

ACTIVES, EEE Components, INSPECTION, ELECTRICAL & VERIFICATION, PASSIVES, TESTING

Control Strategy, an accelerometer perspective

Posted by María Teresa Rodríguez
On May 21, 2020
0

An accelerometer is a sensor that measures acceleration. These sensors can be used in shock and vibration measurements.

The location of the control accelerometer is a key decision when vibration tests take place, as it can roughly affect the results in this kind of tests with small components. Commonly, the control accelerometer is placed in one...

EEE Components, Microsectioning - Short Technical Notes, PASSIVES, PHYSICAL, MECHANICAL & ASSEMBLY, TESTING

Microsectioning inspection of assembled capacitors

Posted by Mari Carmen López
On May 9, 2020
0

Cross-sectioned ceramic capacitors were metallographically prepared in the Materials & Processes Laboratory, recognized as a recommended facility for such activity by the ESA authority (MEMO ESA-TECMSP-MO-013165).

Page 2 of 3123