New Chip NTC thermistors for Conductive Adhesion Mounting

Posted by doEEEt Media Group
On December 2, 2020
0

TDK Corporation announces the development of new chip NTC thermistors designed for conductive adhesion mounting, expanding TDK’s NTCSP series product lineup. The chip NTC thermistors are used for temperature sensing and compensation, measuring without direct contact in automotive applications including ABS, inside the transmission or engine, and more.

ACTIVES, EEE Components, PASSIVES

NTC Thermistors for Inrush Current Limiting

Posted by doEEEt Media Group
On November 12, 2020
0

NTC thermistors are temperature-dependent resistors that employ special semiconductor ceramics with a negative temperature coefficient (NTC). They have high resistance at room temperature, and when they are energized, they generate heat by themselves and the resistance falls as their temperature rises.

EEE Components, PASSIVES

Small 0402 SMD NTC Thermistors by 470 kΩ R25 to Lower Current Consumption

Posted by doEEEt Media Group
On November 12, 2020
0

Vishay BCcomponents has extended its broad portfolio of SMD devices with a new R25 value of 470 kΩfor the NTCS0402E3….T series of glass protected NTC thermistors in the tinned nickel 0402 case.

EEE Components, PASSIVES

AEC-Q200 High Accuracy NTC Thermistor With Long PEEK-Insulated, NiFe Leads

Posted by doEEEt Media Group
On October 26, 2020
0

Vishay Intertechnology introduces a new epoxy-coated NTC thermistor with long PEEK-insulated, NiFe leads and a low thermal gradient for fast, high accuracy temperature measurement, sensing, and control in automotive and industrial applications.

ACTIVES, EEE Components, PASSIVES

How to Use Temperature Protection Devices – NTC Thermistors

Posted by doEEEt Media Group
On October 24, 2020
0

NTC thermistors are heat-sensitive resistor elements of which resistance values rapidly decrease with rising of temperature. With this property, they are used as temperature protection devices for protecting circuits from overheating as well as temperature sensors.

EEE Components, PASSIVES, SPECIFICATIONS / QPLs

Issue 208 of ESCC QUALIFIED PART LIST (QPL)

Posted by Emilio Cano García
On September 17, 2020
0

The changes in issue 208 of ESCC QUALIFIED PART LIST (QPL) are included in the DCR 1348 and detailed herein below

EEE Components, MANUFACTURER NOTIFICATION, PASSIVES

Glass Encapsulated Beads ESCC 4006/014 Type NTC Thermistors

Posted by Manuel Padial Pérez
On July 12, 2020
0

In this post are addressed two product change notifications (PCN) affecting to 4006/014 type variants. Changes which have been discussed and agreed with ESA without any effect on the qualification status of ESCC qualified devices

EEE Components, PASSIVES

Military and Aerospace Set for Growth in 2020s

Posted by doEEEt Media Group
On May 28, 2020
0

After the Space Shuttle was retired in 2011, the United States had to rely on Russia to bring astronauts to and from orbit. Today, we’re preparing for SpaceX and Boeing to fly crews to the International Space Station. In the last decade, the F-35 entered its second decade of development; today, more than 400 aircraft have been delivered.

EEE Components, PASSIVES

TDK NTC Thermistors TTI Tech Specs Video

Posted by doEEEt Media Group
On April 29, 2020
0

EPCOS series S861 and M703 NTC thermistors by TDK, provide accurate temperature measurements in a variety of applications. The S861 series are AEC-Q200 qualified sensors with a miniature, epoxy encapsulated thermistor.

[vc_btn title="Choose the best option for your design using the comparation tool...

ACTIVES, EEE Components, PASSIVES

How to use PTC thermistors as current protection

Posted by doEEEt Media Group
On June 21, 2019
2

PTC thermistors are used as ICLs (inrush current limiters) to protect circuits of electrical and electronic devices against inrush currents easily and effectively.

Page 2 of 212