COTS Electronic Parts for Next Space Challenges and Achievements

Posted by doEEEt Media Group
On August 1, 2023
0

The presentation will focus on EEE component manufacturer perspectives, component user perspectives, and data availability and accessibility on COTS (reliability, validation…) and its assessment.

EEE Components, PASSIVES

TT Electronics Unveils Busbar Shunt Resistors

Posted by doEEEt Media Group
On June 21, 2023
0

EBW5216 is an electron-beam welded resistance element sandwiched between large copper terminals with optional tin plating. The series offers values of 50 and 100µΩ at down to 1% tolerance, 150ppm/°C TCR (measurement), 20ppm/°C TCR (alloy), and <1µV/°C thermal EMF.

ACTIVES, EEE Components

High Current SMD Choke with Excellent Saturation

Posted by doEEEt Media Group
On March 1, 2022
0

The SMD high-current inductor represents an extension to the proven WE-CHSA series and differs from it only by a newly developed core material. As a result, WE-CHSA P – “P” as in performance – achieves the best saturation behavior among comparable components on the market.

EEE Components, SUPPORT

Importance of Alert and Obsolescence Management on Space Projects

Posted by Manuel Sánchez Ruiz
On February 25, 2022
0

The early identification of parts affected by an alert is important to avoid the use of that part in the design if an alternative is available. In the case the part has already been procured, it is important to know about the alert to see which solutions are available or the specific impact of the alert on our application.

ACTIVES, EEE Components

Electronic components for motor vehicles: the solution in New Space?

Posted by Demetrio López
On September 16, 2021
0

There are well-known advantages to using these photonic technologies in space, such as the limited generation of noise, electromagnetic immunity,

EEE Components, PASSIVES

Addressing EMC in Automotive Components

Posted by doEEEt Media Group
On August 23, 2021
0

Würth Elektronik Webinar

Why are passive Automotive Standard Products (ASP) something different from Industrial components? Which qualifying processes are behind those products. Is just AEC-Q200 conformity not enough to be used in Automotive applications? There are different materials used for ferrite cores, which need to be used, and when? Some components seem to...

EEE Components, PASSIVES

Murata Releases AEC-Q200

Posted by doEEEt Media Group
On August 12, 2021
0

The LQW21FT_0H series is compliant with AEC-Q200 and delivers a combination of both broadband impedance and high-current performance. Thanks to state-of-the-art ceramic material and coil structure technologies, Murata can supply these components in a space-saving size format that other manufacturers cannot match. They are housed in compact 0805-inch case size, with 2mm × 1.2mm × 1.6mm dimensions.

Small Sats Testing

Component Selection in New Space Applications

Posted by José Francisco Largaespada
On July 2, 2021
0

Component engineering consists of all the activities needed to correct the components’ correct selection, adapting their characteristics to the specific project requirements. It is easy to understand that for the correct component selection is therefore indispensable the availability of a PA plan. A component selection must be made, considering all the provisions stated in the PA plan regarding design, production, planning, and testing.

EEE Components, PASSIVES

TDK Extends its Wide Range of Compact SMT High-Current Chokes

Posted by doEEEt Media Group
On June 23, 2021
0

Extended its range of EPCOS ERU-SMT power inductors with the new ERU19, ERU24 and ERU27 (B82559*) series. Each product line is comprised of up to 10 types, covering inductance values from 1.0 µH to 30 µH. Overall, a range of saturation currents at 25 °C from 11.5 A DC to 101.5 A DC is covered.

EEE Components, PASSIVES

New AEC-Q200 Compliant Thick Film Chip Resistor Arrays

Posted by doEEEt Media Group
On June 7, 2021
0

The new AEC-Q200 compliant Model CATxxA-LF concave and CAYxxA-LF convex chip arrays are available in two different widths of 1 and 1.6 mm and contain two or four pieces of isolated thick film resistive elements printed onto a single ceramic substrate.

Page 1 of 912 3 ›»