Passive Components Electrodes and Terminations

Posted by doEEEt Media Group
On July 24, 2024
0

Electrodes and terminations are fundamental to the construction of passive electronic components, with emphasis upon stacked ceramic solutions for capacitance, resistance, inductance and sensing in electronic circuits. Older legacy materials for electrodes and terminations include palladium and silver respectively. These electrodes and terminations are still consumed in low layer count ceramic components or in specialty chip thermistors and varistors, inductors and resistors.

EEE Components, PASSIVES

Non-Linear Resistors: Thermistors, Varistors, Memristors

Posted by doEEEt Media Group
On June 22, 2023
0

The non-linear resistance behavior is successfully use to get specific features like sensors, limiters, ESD protection, self-balancing temperature stabilisation etc. using still a relatively simple and reliable passive component.

ACTIVES, EEE Components

Latest Circuit Protection Devices Overview

Posted by doEEEt Media Group
On July 17, 2021
0

Circuit protection devices are the safeguard electronic circuits that protect from overvoltage, overcurrent, overtemperature, and ESD. The article provides an overview of the most common circuit protection devices and the latest released products in this field.

EEE Components, PASSIVES

Varistors for Automotive Ethernet

Posted by doEEEt Media Group
On May 4, 2021
0

AVX Varistors AVX began shipping a selection of multi-layer varistors (MLV) in 1988 and entered the automotive supply chain in 2001. AVX has adopted bismuth oxide (Bi2O3)-based construction for its high reliability and has resulted in zero defective parts per million quality record since 2008. In addition, these devices meet the strict automotive quality standards (AEC-Q200, for example) and as such, are an ideal choice for protecting automotive Ethernet circuits.

ACTIVES, EEE Components

New Series of its Thermally Protected Varistor Technology

Posted by doEEEt Media Group
On March 13, 2021
0

Constructed with a proprietary thermally protected varistor technology (TMOV) developed by Littelfuse, this new varistor incorporates both a built-in thermal disconnect function and electric arc shield. This combination provides additional robust protection to prevent catastrophic failure and fire hazard even under the extreme circumstances of abnormal overvoltage conditions or varistor end-of-life.

EEE Components, PASSIVES

TDK Releases Failsafe Chip Varistors for Surge Protection of Automotive Battery

Posted by doEEEt Media Group
On March 10, 2021
0

…

ACTIVES, EEE Components, PASSIVES

Optimal Applications for Chip Varistors for ESD

Posted by doEEEt Media Group
On November 18, 2020
3

Chip varistors have both surge absorption capabilities and noise-suppressing effects. The equivalent circuit is a capacitor connected parallelly to two Zeners connected opposite to each other.

EEE Components, PASSIVES

New Series of Varistors for Overvoltage Protection and Enhanced Monitoring

Posted by doEEEt Media Group
On November 9, 2020
0

TDK Corporation presents two new series of ThermoFuse® varistors, which are equipped with monitor outputs and integrated thermal protective components for overvoltage protection. The MT25 series (B72225M*) currently covers a voltage range from 150 VRMS to 385 VRMS

ACTIVES, EEE Components, PASSIVES

How to Use ESD/surge Protection Disk Varistors

Posted by doEEEt Media Group
On July 9, 2020
0

Varistors can be used as suppressors to protect devices and circuits from transient abnormal voltages including an ESD (electrostatic discharge) and a lightning surge

EEE Components, PASSIVES

Capacitors and Varistors in Automotive EV/HEV Applications

Posted by doEEEt Media Group
On June 4, 2020
0

AVX and Mouser Electronics Tech Chat

In this episode of All About Circuits’ Tech Chats, Chris Anderson sits down with Daniel West of AVX to discuss the unique products AVX offers that provide the performance and durability needed in EVs and HEVs.

Source: AVX,...

Page 1 of 212