40 results found for MIL-STD-202

The purpose of this test is to measure the capacitance of component parts. Preferred test frequencies for this measurement are 60 Hz, 100 Hz, 120 Hz, 1 kHz, 100 kHz,...

This test is performed to evaluate the properties of materials used in components as they are influenced by the absorption and diffusion of moisture and moisture vapor.

The salt atmosphere test, in which specimens are subjected to a fine mist of salt solution, has several useful purposes when utilized with full recognition of its...

This resistor noise test method is performed for the purpose of establishing the "noisiness" or "noise quality" of a resistor in order to determine its suitability for...

This test is conducted for the purpose of determining the electrical contact reliability of such items as electromechanical relays, switches, etc., under intermediate...

This test is to measure the resistance offered by the insulating members of a component part to an impressed direct voltage tending to produce a leakage of current...

The purpose of this test is to measure the quality factor, commonly called Q, of electronic parts such as capacitors and inductors.

The purpose of this method is to determine if a part, while operating, will ignite an ambient explosive atmosphere.

This test is conducted for the purpose of determining the resistance of a part to exposures at extremes of high and low temperatures, and to the shock of alternate...

The dielectric withstanding voltage test (also called high-potential, over potential, voltage-breakdown, or dielectric-strength test) consists of the application of a...