ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Experimental Study of Displacement Damage Test for Space Application

Posted by doEEEt Media Group
On February 17, 2020
0

The different DD level may be obtained by different particles. Proton is preferred. The energy of proton should be selected based on the proton energy spectrum inside of the spacecraft. Neutron may give underestimate test results. TID and DDD should be tested on the same group samples.

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Component and System Testing at the CHARM Mixed-Field Facility – CERN

Posted by doEEEt Media Group
On February 17, 2020
0

The new CERN High energy AcceleRator Mixed Field facility (CHARM) allows to test several single components, as well as more complex devices, at different locations, characterized by particle spectra representative of the high- and low-altitude atmospheric, particle accelerator and ground environments.

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, Small Sats Testing, TESTING

The NaoSat nanosatellite platform for in-flight radiation testing

Posted by doEEEt Media Group
On February 17, 2020
0

A modular architecture specifically designed for integrating technology demonstrators and test applications in a fast-to-orbit cycle allows any interested team to prepare its payload for flight into orbit in less than 1 year.

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Radiation test strategies for a manufacturer

Posted by 3D
On February 14, 2020
0

Things are becoming worse since the semiconductor came into a sub-micron and deep sub-micron era. New challenges and 3D PLUS radiation test strategies are presented.

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Total Ionizing Dose (TID) testing, Update on ESCC22900

Posted by doEEEt Media Group
On February 14, 2020
0

Total Ionizing Dose (TID) testing, Update on ESCC22900 and discussion on TID response variability (part to part and lot to lot) and impact on sampling size and test requirements

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Synergy effect SEE – TID on micro-electronic component

Posted by doEEEt Media Group
On February 14, 2020
0

The radiation hardness of modern electronic devices regarding the space radiation environment is characterized according to two main aspects: cumulated effects and single event effects.

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Test Vehicle TID radiation test

Posted by doEEEt Media Group
On February 14, 2020
0

This engineer service, focus in radiation in electronic devices, shows a Test Vehicle TID radiation. In order to advance the report, a few conclusion had been made by our expertise team. First, is the diffusion lots, the two ones under TID behave the same. They are homogenous which confirms there is no process dispersion.

ALTER Innovation, EEE Components, Optoelectronics

Laser-driven source for space applications at the Spanish Pulsed Lasers Centre (CLPU)

Posted by doEEEt Media Group
On February 13, 2020
0

The advent of the chirped-pulse amplification (CPA) technique has revolutionized the physics of particle accelerations. Compared to a conventional accelerator, lasers can produce ultrashort particle beams with high brilliance and broad energy spectrum.

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Quality Assurance and Safety at a TID Radiation test laboratory

Posted by doEEEt Media Group
On February 13, 2020
0

The Total Ionizing Dose (TID) radiation test on EEE parts involves a number of variables and processes which must be kept under control to ensure correct test execution and compliance with the used test method. From the test plan definition to the test report issue, the proper methodology needs to be put in place.

ALTER Innovation, ENDURANCE, ENVIRONMENTAL & RADIATION, TESTING

Dedicated irradiators and facilities for material studies

Posted by doEEEt Media Group
On February 13, 2020
0

Space is a harsh environment due to vacuum, UV, temperature, vibration and radiation…etc. Before landing a space vehicle, devices and materials have to be tested at ground level in order to estimate the effect of all these parameters to know about irradiators.

Page 2 of 212

Tag: TID