Diplexer designs advance RF systems: novel balanced diplexers enhance performance and reduce interference.
Diplexer based on coupled resonators
read more
Blog >
All Blog Posts
Electronic Design
Flammability UL 94 Standards
UL 94 is a safety standard to determine the flammability of plastic materials. This test is released by Underwriters Laboratories of the United States.
How to use temperature protection devices NTC thermistors
NTC thermistors enable temperature sensing and compensation in circuits, protecting devices like batteries, LEDs, and microcontrollers.
ALTER awarded contract for STUMM prototype development of IFMIF-DONES
IFMIF-DONES studies material behavior under neutron irradiation, aiding fusion energy development with advanced monitoring technology.
How to choose a surface-mount inductor for a DC-DC converter
A surface-mount inductor is essential for efficient DC-DC converters, influencing performance, ripple, and EMI in circuit designs.
Thermistor measurement systems explained
Thermistors offer precise temperature sensing, leveraging resistance changes for accurate thermal monitoring and control.
Thermistor-based temperature sensing system optimization and evaluation
Thermistor-based temperature systems ensure accurate sensing and optimization for effective thermal management solutions.
Capacitor charging currents explained with LTspice
Simulate capacitor charging currents in LTspice to analyze the effects of resistance, inductance, and capacitance on circuit performance.
Bus capacitor selection for eMobility inverters
Optimize bus capacitor selection for eMobility inverters by analyzing ripple current, voltage ripple, and current-carrying capacity.
Practical capacitor charging losses
Energy losses in capacitor charging and the role of resistors, inductors, and diodes in optimizing circuit efficiency.
Coupled inductor filter and what is good for
Understand the concept and applications of a coupled inductor filter, its ripple attenuation, and sensitivity to design parameters.
Lumped element L-C filters design and characteristics
L-C filters, or lumped element filters, provide compact, customizable designs for precise lowpass, highpass, bandpass, and band-reject applications.
How to fix power supply EMC issues
Learn how to address EMC issues in power supplies with effective filter design to reduce noise and improve performance.
Addressing EMI of common mode chokes
Common mode chokes mitigate EMI by filtering differential and common mode noise in power systems, addressing high-frequency challenges.
High CV MLCC DC BIAS and AGEING capacitance loss explained
Class II MLCCs face capacitance loss from DC bias and aging, impacting reliability in automotive, medical, and industrial electronics.
Tantalum polymer capacitors benefits in decoupling applications
Tantalum polymer capacitors offer compact, reliable decoupling with high capacitance, low ESR, and stable performance in demanding applications.
Capacitor for coupling and decoupling applications
Coupling capacitors enable signal transmission by blocking DC voltage while allowing AC signals to pass effectively.
Flyback converter power conversion explained
Design and operation of a flyback converter, focusing on DCM, safety, and accurate component selection for optimized performance.
Advancing thermistor-based temperature sensing systems
Thermistor-based temperature sensing systems are compared to RTDs, highlighting design challenges and key components.
Filter performance: Shape factor and selectivity
Shape factor reflects filter performance, measuring transition sharpness between passband and attenuation levels for optimal selectivity.