Extension
(the validity date of the certificate is extended, and the scope is not changed, which means no new components are included):
- Certificates 109Q and 110Q from AVX (France). These certificates list Multilayer Ceramic Capacitors Chip qualified to ESA ESCC 3009.
- Certificate 138P from L. Gore (Germany). This certificate lists Polyimide Insulated Wire based on SPC2110, included in the detailed specification ESCC 3901/009.
- Certificate 326D from ST Microelectronics (France). This certificate lists P-Channel MOSFET based on type STRH40P10 and STRH12P10, included in the detail specifications ESCC 5205/025 and ESCC 5205/029.
Editorial:
- Certificate 323C from Exxelia (France). This certificate lists Multilayer Ceramic Capacitors Chip Class 1 based on the CEC series. CEC1902S and CEC1904S models have expanded the qualified range in the last edition, including 50V rated voltage capacitors.
Related Articles
Introduction to Norris-Landzberg equation for thermal cycling test definition
The Norris-Landzberg equation is that it is required by ECSS in many calculations. For example, ECSS-Q-ST-70-61 and several ESA Memos indicate that the use of this equation is mandatory in order to assess if the qualification perform of PBAs covers the environment of the mission. Similar methodologies are widely referenced in MIL and NASA standards
Pushing Boundaries: Cryogenic Testing Expertise for Space EEE Components at ALTER
ALTER Technology is pushing the limits of space reliability through advanced cryogenic testing of EEE components for ESA’s ARIEL mission. Using state-of-the-art helium cryostats reaching temperatures as low as 10K, ALTER qualifies critical components, from microswitches to operational amplifiers—to ensure flawless performance in extreme thermal environments.
Discover the ALTER EEE parts engineering and Product Assurance capabilities at your service
ALTER EEE and Product Assurance scenario: The team of Senior EEE parts and PA engineers at ALTER will guide and help your team to understand the key drivers for the selection of the most suitable parts for your design, based on the deep knowledge of space market as well as the main standards used in Europe (ECSS-Q-ST-60s), US (NASA GSFC, DLA MIL-PRFs and QPL/QMLs) and commercial market (AEC-Q, …).
